Molysyn 605 – Contains latest additives such as; Anti-wear additives, Extreme Pressure additives and Anti-Oxidation additives that oil protected against breaking down from shear and pumping action. Improve sealing action.

  • Excellent High heat resistance properties that protect the oil life and minimize corrosion and oxidation on the machine parts.
  • Increased compression through better ring Seal.
Molysyn Drum

Packaging: 19 LTR, 208LTR

  • A reduction in oil consumption, eliminate sticking valves and lifters.
  •  Extreme pressure protection of the engine bearings, valve train, rings, cams and lifters, piston and piston rings, therefore reduce Engine noise, may result some fuel saving.
  •  Form a tenacious protective lubricating film between the surface in contact, to
    reduce “drag”, galling, plucking and seizing of the machine parts.

Molysyn 605 is recommended to use in the following machines and equipments.
1. Engine Crankcase (Recommended for old worn out engine e.g. burning and leaking oil but not recommended if the engine is broken rather than worn out) 5 – 15%.
2. Gear Boxes, Transmissions and Vee-drive – 10 – 12 %.
3. Compressor Crankcase (Worn out and high oil consume equipments only) 5–10 %.
4. Hydraulic Systems – 5 – 15 %.
5. Applicable to automatic or semi – automatic oiling system.

To complement this highly specialized additive package a proven frictional modifier, Micron Moly is further blended into Moly E.P. Oil Treatment. Micron Moly is a liquid soluble type of moly that plates to the metal surfaces of the equipment. Once plated, the moly forms a long lasting lubricant film in which prevents the metal surfaces from coming into contact with each other. By preventing metal to metal contact, damaging frictional wear is eliminated, which leads to Less Downtime and Longer Equipment Life.