FG 110 HIGH TEMP FOOD GRADE GREASE
FG 110 High Temp Food Grade Grease H1 with Microshield® is a fully synthetic Extreme Pressure, anti-wear, high temperature grease that is specially formulated for use in the lubrication of food, feed and pharmaceutical processing and packaging equipment, especially those pieces of equipment that are subjected to high loads and high moisture conditions.
Packaging: 18KG
Features:
Synthetic Food Grade Grease H-1 with Microshield® can be used in the lubrication of ball, roller, journal and sliding bearing applications and chain applications, where there is a chance of incidental contact with food, foodstuffs, drinking water, potable water, or ground water may occur. Typically these applications can be found in the following industries:
Meat & Poultry Processing Plants
|
Egg Processing Plants
|
Fish & Seafood Processing Plants
|
Breweries & Wineries
|
Soft Drinks & Bottling Plants
|
Vegetable & Fruit Processors
|
Cheese & Cheese Product Producers
|
Bakeries
|
Snack Food Manufacturers
|
Pasta Manufacturers
|
Pet Food & Animal Feed Producers
|
Oil Mils & Seed Cake Processors
|
Pharmaceutical & Drug Manufacturers
|
Cosmetic Manufacturers
|
Food & Beverage Container Manufacturers
|
Paper & Paper Board Manufacturers
|
Water Well Drillers
|
Drinking & Portable Water Treatment
|
Synthetic Food Grade Grease H-1 with Microshield® is compounded from the highest quality, severely hydro-finished technical white Polyalphaolefin (PAO) synthetic base fluids available. Blended into the hydro-finished technical white PAO synthetic base fluids are a bentone base thickener, adhesive/cohesive additive and other selected performance additives.
The formulation provides Synthetic Food Grade Grease H-1 with Microshield® with the following outstanding performance
features:
- 1. Excellent resistance to water washout and waterspray-off.
- 2. Excellent cold temperature starting and pumpability.
- 3. Excellent shear and mechanical stability.
- 4. Superior anti-wear and extreme pressure load carrying properties.
- 5. Excellent rust and oxidation inhibiting characteristics.
- 6. Excellent resistance to oxidation and thermal degradation.
- 7. No dropping point.
- 8. Excellent resistance to acidic compounds.
- 9. Excellent resistance to wash out, pound out, splatter and squeeze out.
- 10. Excellent ability to retain its consistency and resist separation of its base oils.
PRODUCT INFORMATION:
Further blended into Synthetic Food Grade Grease H-1 with Microshield® is a unique blend of USDA and FDA acceptable microbicides known as Microshield® for knockdown performance against a broad spectrum of bacteria, yeast and molds. Microshield® provides the product with an effective way to control, inhibit and retard the growth of bacteria, yeast and molds that may come into contact with Synthetic Food Grade Grease H-1 with Microshield® due use. Microshield® is not an antiseptic or sterilizing agent but they do however effectively prevent bacterial growth and control microbiological proliferation if the Synthetic Food Grade Grease H-1 with Microshield® becomes contaminated during use.
Synthetic Food Grade Grease H-1 with Microshield® has an operating temperature range of -40° to 260°C (-40 to 500°F).
TYPICAL SPECIFICATIONS OF FG 110 HIGH TEMP FOOD GRADE GREASE:
NLGI Grade0
|
1
|
2
|
Type of Thickener Bentone
|
Bentone
|
Bentone
|
Worked Penetration 60 Strokes
|
|
|
(ASTM D-217) 355-385
|
|
|
Roll Stability (ASTM D-1831)
|
310-340
|
265-295
|
% Change in Consistency 9.0
|
|
|
Four Ball EP Test (ASTM D-2596)
|
9.0
|
9.0
|
Weld Point, 250kg
|
|
|
Load Wear Index, 35kg
|
|
|
Four Ball Wear Testy (ASTM D-2266)
|
250
|
250
|
40kg/12rpm/1hr.167°F
|
35
|
33.7
|
Scar Diameter, 0.6mm
|
|
|
Timken EP Test (ASTM D-2509)
|
|
|
OK Load. 50lbs
|
|
|
Falex EP Continuous Load
|
|
|
(ASTM D-3233 Procedure A)
|
0.6
|
0.6
|
Failure Load. 1300lbs
|
|
|
Oxidation Stability (ASTM D-942)
|
50
|
50
|
PSI Loss @ 100 0.5hours
|
|
|
PSI Loss @ 300 1.5hours
|
|
|
Rust Inhibition Test (ASTM D-1743) 1,1,1
|
|
|
Water Washout Characteristics (ASTM D-1264)
|
1300
|
1360
|
Water Spray Off Test (ASTM D-4049)
|
|
|
% Loss
|
0.5
|
0.5
|
Evaporation Loss (ASTM D-2595)
|
1.5
|
1.5
|
1% @121 °C
|
22
|
|
Hours
|
1,1,1
|
1,1,1
|
Copper Strip Test1a (ASTM D-4048)
|
3.5%
|
3.3%
|
Low Temperature Torque (ASTM D-1478) @ 54°C
|
15%
|
15%
|
Starting Torque g. 4,980cm
|
1%
|
0.5%
|
Running Torque g. 1,750cm
|
1a
|
1a
|
NLGI Grade
|
|
1
|
2
|
Lincoln Ventmeter
|
|
|
|
PSI @ 38°C (100°F)
|
|
|
350
|
PSI @ -1°C (30°F)
|
200
|
300
|
450
|
PSI @ -18°C (0°F)
|
450
|
700
|
1000
|
PSI @ -29°C (-20°F)
|
1050
|
1100
|
1150
|
PSI @ -40°C (-40°F)
|
1300
|
1450
|
1750
|
Base Oil Properties
|
|
|
|
Viscosity @ 40°C cSt (ASTM D-445)
|
87.8
|
76.34
|
76.34
|
Viscosity @ 100°C cSt (ASTM D-445)
|
11.25
|
10.17
|
10.17
|
Viscosity Index (ASTM D-2270)
|
116
|
116
|
116
|
Flash Point °F/°C (ASTM D-92)
|
450°/232°
|
487°/253°
|
487°/253°
|
Pour Point °F/°C (ASTM D-97)
|
-40°/-40°
|
-35°/-37°
|
-35°/-37°
|