200S- SILVER STREAK SPECIAL MULTI-LUBE

200S Silver Streak® Special Multi-Lube is compounded from a unique blend of select solvent refined severely hydrofinished high viscosity index paraffin base oils and polyalphaolefin synthetic base oils. These base oils were selected for their exceptional physical and chemical stability, and their exceptional serviceability over a wide range of temperatures. These base fluids are further compounded to provide the 200S Silver Streak® Special Multi-Lube with superior adhesive film-forming characteristics. This adhesive film-forming characteristic allows Silver 200S Silver Streak® Special Multi-Lube to resist “squeeze out” and “sling out” along with allowing the product to cling tenaciously, even to gears that are in a vertical orientation. Also this compounding allows 200S Silver Streak® Special Multi-Lube to have a superior resistance to oil separation due to centrifugal forces that are common in many coupling applications. Further this special compounding allows 200S Silver Streak® Special Multi-Lube to remain soft and pliable over a long period of time without the use of any kind of solvents, especially non-flammable chlorinated solvents such as 1,1,1 trichloroethane that are being considered undesirable for use due to environmental consideration.

To fortify the adhesive film strength of 200S Silver Streak® Special Multi-Lube, a combination of molybdenum disulfide and various solid lubricants are compounded into 200S Silver Streak® Special Multi-Lube. The molybdenum disulfide and various lubricants contribute to the structure of the film, and also improve the anti-wear, extreme pressure characteristics and load-carrying capabilities of 200S Silver Streak® Special Multi-Lube beyond those of conventional lubricants. The load carrying ability of 200S Silver Streak® Special Multi-Lube is in excess of 500,000 pounds per square inch. 

This combination of molybdenum disulfide and various solid lubricants also forms a protective layer between the mating surfaces. This protective layer provides a cushioning effect between the contacting asperities that minimizes pitting of the mating surfaces.

200S Silver Streak® Special Multi-Lube offers the following advantages.

1. Forms an almost indestructible adhesive film with a “cushioning” effect even under extreme pressure and at very low speeds.
2. Resists film destruction by contaminating oils or greases “migrating” from nearby mechanisms.
3. Resistant to water washout.
4. Resistant to the adhering of dirt or dust.
5. Reduction in contact temperatures.
6. Minimizes cold metal welding at the contacting asperities.
7. Minimizes the vibration of “stick slip”.
8. Exhibits excellent reduced wear characteristics.
9. Maximizes a reduction in lubricant consumption rate.

Only 200S Silver Streak® Special Multi-Lube Ultra Light grade can be used in industrial type gear cases to replace an SAE 250 weight or ISO viscosity grade lubricant.

200S Silver Streak® Special Multi-Lube can be applied either manually or by heavy duty automatic lube systems. 200S Silver Streak® Special Multi-Lube Heavy and Extra Heavy can be pumped down to 50°F/10°C*. 200S Silver Streak® Special Multi-Lube Medium can be pumped down to 45°F/7°C*. 200S Silver Streak® Special Multi-Lube Light can be pumped to 32°F/0°C*. 200S Silver Streak® Special Multi-Lube Extra Light can be pumped to 14°F-10°C*. 200S Silver Streak® Special Multi-Lube Extreme Light can be pumped to -20° to -25°F/-29° to -32°C*. 200S Silver Streak® Special Multi-Lube Ultra Light can be pumped to -40°F/-40°C*. When using 200S Silver Streak® Special Multi-Lube Ultra Light in summer months or in warm weather conditions, consideration should be given to using a heavier grade of 200S Silver Streak® Special Multi-Lube.

*May vary with types of equipment and dispensing system configuration used.

TYPICAL PROPERTIES: