195 SUPERTAC FOOD GRADE GREASE H1
195 Supertac Food Grade Grease H1 is an extreme pressure, anti-wear, high temperature grease that is specially formulated for use in the lubrication of food, feed and pharmaceutical processing and packaging equipment, especially those pieces of equipment that are subjected to high loads and high moisture conditions.
195 Supertac Food Grade Grease H1 meets the requirements for a USDA H-1 quality lubricant and the requirements of the United States Code of Federal Regulations 21CFR 178.3570, 178.3620(b), and 573.680 of the United States Food and Drug Administration’s Regulations.
195 Supertac Food Grade Grease H1 can be used in the lubrication of ball, roller, journal and sliding bearing applications and chain applications, where there is a chance of incidental contact with food, foodstuffs, drinking water, potable water, or ground water may occur. Typically, these applications can be found in the following industries:
|
Meat and Poultry Processing Plants
|
Egg Processing Plants
|
|
Fish and Seafood Processing Plants
|
Breweries and Wineries
|
|
Soft Drink and Bottling Plants
|
Vegetable and Fruit Processors
|
|
Cheese and Cheese Product Producers
|
Bakeries
|
|
Snack Food Manufacturers
|
Pasta Manufacturers
|
|
Pet Food and Animal Feed Producers
|
Oil Mills and Seed Cake Processors
|
|
Pharmaceutical and Drug Manufacturers
|
Cosmetic Manufacturers
|
|
Food and Beverage Container Manufacturers
|
Paper and Paperboard Manufacturers
|
|
Water Well Drillers
|
Drinking and Potable Water Treatment
|
195 Supertac Food Grade Grease H1 is compounded from the highest quality, highly refined and purified non-toxic 100% pure paraffin base technical white and USP grade white oils available. Blended into the paraffin base technical white USP grade white oils is an aluminum complex base thickener, adhesive/cohesive additives, a food grade anti microbicide and other selected performance additives.
This formulation provides with the following outstanding performance features:
1. Excellent pumpability characteristics for use in centralized lube systems.
2. Excellent resistance to water washout and water spray-off
3. Excellent shear and mechanical stability.
4. Superior antiwear and extreme pressure load carrying properties.
5. Excellent rust and oxidation inhibiting characteristics.
6. Excellent resistance to oxidation.
7. A high dropping point.
8. Excellent resistance to acidic compounds.
9. Protection against rancidity and build-up due to bacterial and fungal growth
10. Excellent resistance to wash out, pound out, splatter and squeeze out.
11. Excellent ability to retain its consistency and resist separation of its base oils.
195 Supertac Food Grade Grease H1 has an operating temperature range of 10° to 350°F.
TYPICAL PROPERTIES:
|
NLGI Grade
|
#2
|
|
Type Thickener
|
Aluminum Complex
|
|
Worked Penetration 60 strokes (ASTM D-217)
|
265-295
|
|
Roll Stability (ASTM D-1831)
|
|
|
% Change in consistency
|
9.3%
|
|
Dropping Point ºF/ºC (ASTM D-566)
|
510º/265.56º
|
|
Four Ball Wear (ASTM D-2266)
|
|
|
(40 kg, 1200 rpm, 1 hr @ 167ºF)
|
|
|
Scar diameter, mm
|
0.55
|
|
Four Ball EP (ASTM D-2596)
|
|
|
Weld Point, kg
|
400
|
|
Load Wear Index, kg
|
55
|
|
Timken EP (ASTM D-2509)
|
|
|
Ok Load, lbs.
|
45
|
|
Falex Continuous Load (ASTM D-3233)
|
|
|
Failure Load, lbs
|
1360
|
|
Leakage Tendencies (ASTM D-1263)
|
|
|
Total Leakage, grams
|
0.13
|
|
Water Spray Off Test (ASTM D-4049)
|
|
|
% Loss
|
9.2%
|
|
Water Washout Characteristics (ASTM D-1264)
|
|
|
% Loss @ 175ºF
|
7.7%
|
|
Rust Prevention Test (ASTM D-1743)
|
|
|
Rating
|
1,1,1
|
|
1,1,1
|
1a
|
|
Oxidation Stability (ASTM D-942)
|
|
|
Psi Loss @ 100 hours
|
1
|
|
Evaporation Los @ 250ºF, 22 hrs. (ASTM D-2595)
|
|
|
% Loss
|
1
|
|
Base Oil Properties
|
|
|
Viscosity @ 40ºC, Cst (ASTM D-445)
|
581
|
|
Viscosity @ 100ºC, Cst (ASTM D-445)
|
65.8
|
|
Viscosity Index (ASTM D-2270)
|
108
|
